Jeep YJ Transfer Case Skid 87-95 Wrangler YJ No Body Lift Req'd Under Cover Fab

HD Transfer Case Skid Plate for 87-95 Jeep Wrangler YJ (No Body-Lift Req'd)(6061-T6 Aluminum) Fits 87-95 Jeep Wrangler YJs with standard or automatic transmissions. Fabricated from 1/4 inch thick 6061-T6 Aluminum plate. The parts were designed in 3D CAD software and laser cut then bent on a CNC press brake for a perfect fit every time.

The UCF Transfer Case Skid Plate is reinforced in the middle of the skid from one side to the other with a stiffening channel/transmission mount. The front and rear edges are ramped to increase strength and aid in sliding over obstacles. This product will increase ground clearance by 1/2 inch over the factory skid plate. The total height of this system is about 3 inch.

This skid plate will come with a 3/16 inch steel adapter plate for the front set of mounting holes. It is pre-attached to the skid with 3/8 inch low-profile bolts. The adapter will need to be removed and painted prior to final install.
No Body-lift Required to run this skid. Shipped UPS in bare aluminum Mounting hardware not included. 87-95 YJs will require (6) 1 1/2 inch long x 1/2 inch-13tpi hex bolts with flat washers.
Details:

• 87-95 Jeep Wrangler YJ
• No Body-Lift Req'd
• 6061-T6 Aluminum
• Shipped UPS in bare aluminum
• 87-95 YJs will require (6) 1 1/2 inch long x 1/2 inch-13tpi hex bolts with flat washers
• Mounting hardware not included