More power than a hemi! This kit from Prodigy Performance gives you the ultimate power boost for your 2007-2011 JK Wrangler Manual Transmission vehicles only. The Stage 3 kit takes our Stage 2 kit to a higher level. The kit includes ARP head studs custom made for the 3.8L Wrangler engine, a Kennebell Boost-A-Pump, new exhaust manifold gaskets, valve cover gaskets, spark plugs, and a custom Prodigy tune that will push your Jeep to the 350 RWHP level. (actual RWHP varies depending on the setup of your Jeep)
Prodigy Performance offers the best performing and highest quality forced induction kits for your Jeep JK Wrangler on the market today. Quality is important when purchasing a power adder that will transform your vehicle from its original naturally aspirated operation to a forced induction system. We use only the highest quality components in our kits after they have been thoroughly tested and proven to satisfy our quality standards. The 3.8L motor lacks serious power putting down only 130RWHP, with our
Prodigy Performance turbo system installed you will put down more power than the 3.6 Pentastar supercharger kits!
Beginning with the turbocharger unit itself, you have a Garrett Turbochargers, the world's leading manufacturer of turbochargers.
We also feature Tial wastegates and blow-off valves, HP tuners, K and N filters and a variety of custom made components like our mandrel bent, tig welded and back-purged pipes.
Be sure to check out all the components in the features section below. When you purchase a Prodigy Performance turbo kit, you can be sure you're installing a top quality kit on your Wrangler.
Details:
- Pro-1003 Stage 3 Turbo Kit
- Manual Transmission vehicles only
- Exhaust tubing is made of 304 and 409 stainless steel
- Mandrel Bent, TIG Welded and Back Purged
- Fits 07-11 Jeep Wrangler JK
- Liter 3.8L
- Increase to approximately 350RWHP and 400FTLB Torque betwwen
- 12 Month Warranty
Included in Kit:
- 1 Garrett Turbocharger
- 1 O2 Extension 24 inch length
- 1 MAP Sensor (with cut fin)
- 1 HP Tuners MPVI2
- Manifold Bolt Assembly
- Exhaust Bolt Assembly
- Turbo Bolt Assembly
- 1 Boost Check Valve
- 6 Fuel Injectors-Matched Flow
- Hose Clamps-Full Band
- Wastegate Sensing Line
- 1 Main Turbo Pipe
- 1 Cross Over Pipe
- 1 Down Pipe
- 1 Extension Pipe w/cat converter
- Extension Pipe
- 1 Air Filter
- 1 Air Lock fitting
- 1 Filter-Breather Vent
- 1 Tial Wastegate
- 2 Clamps for wastegate
- 1 V-Band Clamp
- 1 T-4 Turbo Base Gasket
- 1 Turbo Drain assembly
- 1 Turbo Feed Assembly
- 1 Oil Feed Line w/Adapter for Block
- Drain Line w/Oil Pan Fitting
- 1 Inlet Silicone Hose
- 1 Outlet Silicone Hose
- 1 Throttle Body Silicone Hose
- 2 Radiator Core Spacer
- Mounting Stud w/Spacer & Nut
- 1 Charge Pipe w/Grommet
- 1 Intercooler
- Intercooler Bolt Assembly
- 1 Kenny Bell Boost Pump
- 1 set of 16 Prodigy ARP Head Studs
- 1 Wastegate Spring
- 2 Exhaust Manifold Gaskets
- 2 Valve Cover Gaskets
- 1 Custom Tune
- 6 Spark Plugs
- 1 Prodigy 180 degree T-stat
