Jeep TJ Transfer Case Skid 03-06 Wrangler TJ No Body Lift Req'd Under Cover Fab

HD Transfer Case Skid Plate for 03-06 Jeep Wrangler TJ Unlimited (No Body-Lift Req'd)(6061-T6 Aluminum). Fits 03-06 Jeep Wrangler TJ Unlimited with standard or automatic transmissions.

Fabricated from 1/4 inch thick 6061-T6 Aluminum plate. The parts were designed in 3D CAD software and laser cut then bent on a CNC press brake for a perfect fit every time.

The UCF Transfer Case Skid Plate is reinforced in the middle of the skid from one side to the other with a stiffening channel/transmission mount. The front and rear edges are ramped to increase strength and aid in sliding over obstacles. This product will increase ground clearance by about 2 inch over the factory skid plate. The total height of this system is about 2 inch. No Body-Lift Required to run this skid. Shipped UPS in bare aluminum.

Mounting hardware not included. 97-02 TJs will require (6) 1 1/2 inch long x 1/2 inch-13tpi hex bolts with flat washers.
Details:

• 03-06 Jeep Wrangler TJ Unlimited
• (No Body-Lift Req'd)
• (6061-T6 Aluminum)
• Shipped UPS in bare aluminum
• Mounting hardware not included.